Does a calibrated tool make a result acceptable?
No. Calibration characterizes measurement performance under stated conditions. Acceptance also depends on the applicable limits, method, uncertainty and decision rule.
Is resolution the same as accuracy?
No. Resolution concerns the smallest discernible change in indication. Accuracy concerns closeness to a reference or true value and cannot be inferred from display digits alone.
Can a caliper replace a micrometer?
Not automatically. The required geometry, measurement capability and maintenance data determine suitability; apparent convenience is not evidence of equivalence.
Does torque directly measure clamp force?
No. Torque is a rotational moment. Its relationship to clamp force depends on joint conditions, including friction, which a torque reading alone does not resolve.
Are all electronic torque tools recording tools?
No. Electronic indication does not guarantee data logging, export, secure identification or a complete audit trail. Those are separate product capabilities.
Can a borescope rule out internal damage?
Not by itself. Coverage, viewing conditions and the specified inspection method limit what an image can establish.
Is there one universal calibration interval?
No. Intervals depend on applicable requirements, equipment, use, environment and performance history. A generic annual interval is not a universal aviation rule.
What should happen when a tool is missing?
Follow the organization’s tool-control and escalation process. An educational website cannot determine whether an aircraft or work area may be released.
Can these guides be used as maintenance instructions?
No. They are educational references, not repair procedures, approved maintenance data or authorization to perform maintenance.